Hot Products
China Short Fiber Geotextile Suppliers and Factory - Cost-Effective Nonwoven Geosynthetic Material for Construction and Environmental Projects
Product Specifications
WAZ PLASTIC
⚖️
Weight
100g/m² – 600g/m²
📐
Width
1m – 6m
📏
Length
50m / 100m per roll
🎨
Color
White, Black, Green, Camel (Customizable)
Standard physical indexes include tensile strength, tear strength, CBR puncture strength and permeability, meeting national engineering requirements.
Product Features
WAZ PLASTIC
-
💪
High Strength
Due to the use of plastic fibers, it can maintain sufficient strength and elongation in both dry and wet conditions. -
🛡️
Corrosion Resistance
It can resist corrosion for a long time in soil and water with different pH values. -
💧
Good Water Permeability
There are gaps between the fibers, so it has excellent water seepage performance. -
🦠
Anti-Microbial Performance
It is not damaged by microorganisms and moth-eating. -
🏗️
Convenient Construction
Due to its light and soft material, it is convenient for transportation, laying and construction. -
📦
Complete Specifications
Maximum width can reach 9 meters — the widest product in China. Unit area weight: 100–1000g/m². -
✅
Comprehensive Performance
Light weight, low cost, corrosion resistance, and excellent filtration, drainage, isolation and reinforcement.
Applications
WAZ PLASTIC
Widely used in geotechnical projects including water conservancy, electric power, mines, highways and railways.
- Filter material for soil layer separation.
- Drainage material for reservoirs, mine beneficiation and high-rise building foundations.
- Anti-scour material for rivers, dams and slope protection.
- Reinforcement material for subgrades of railways, highways and airport runways, as well as for road construction in swampy areas.
- Thermal insulation material for frost prevention.
- Anti-cracking material for asphalt pavements.
Our Advantages
WAZ PLASTIC
🏭
Factory direct sales with stable quality and competitive price
📦
Complete specifications and sufficient stock for fast delivery
🔍
Strict quality inspection to ensure compliance with standards
⚙️
Customizable weight, width and packaging
🤝
Professional technical support and after-sales service
Construction Technology
WAZ PLASTIC
It is laid manually by rolling, ensuring the cloth surface is flat with an appropriate deformation allowance. Basic requirements for geotextile laying: The seams must intersect with the slope line; at places parallel to the slope toe or where stress may exist, the distance between horizontal seams must be greater than 1.5m. On the slope surface, anchor one end of the geotextile, then lower the roll along the slope to keep the geotextile in a tight state. All geotextiles must be pressed with sandbags, which will be used during laying and retained until the upper layer of material is laid.
Our Certificates
WAZ PLASTIC
Frequently Asked Questions
❓What weight range is available for your geotextile products?
Our geotextiles are available in a weight range of 100g/m² to 600g/m² as standard, with customized options up to 1000g/m² to meet specific project requirements.
❓Can the width and packaging be customized?
Yes. We offer customizable width (standard range 1m–6m, up to 9m), roll length, weight, color, and packaging to suit different engineering and logistical needs.
❓What are the main application areas for this geotextile?
Our geotextile is widely used in water conservancy, electric power, mines, highways, railways, airport runways, slope protection, reservoir drainage, and frost prevention projects.
❓How is the geotextile installed on slopes?
The geotextile is laid manually by rolling. One end is anchored at the top of the slope, then the roll is lowered along the slope to maintain tension. Sandbags are used to hold it in place until the upper layer of material is applied. Seams must intersect with the slope line, and horizontal seam spacing must exceed 1.5m.
❓Does the geotextile meet national engineering standards?
Yes. All products are subject to strict quality inspection. Standard physical indexes — including tensile strength, tear strength, CBR puncture strength, and permeability — comply with national engineering requirements and are certified accordingly.
❓What colors are available and can they be customized?
Standard colors include White, Black, Green, and Camel. Custom color options are available upon request to meet project-specific or branding requirements.