China Suppliers Short Fiber Geotextile Factory - Cost-Effective Nonwoven Material for Civil Engineering
Weight: 100g/m² – 600g/m²
Width: 1m – 6m
Length: 50m / 100m per roll
Color: White, Black, Green, Camel (Customizable)
Standard physical indexes include tensile strength, tear strength, CBR puncture strength and permeability, meeting national engineering requirements.
- 💪 High Strength: Due to the use of plastic fibers, it can maintain sufficient strength and elongation in both dry and wet conditions.
- 🛡️ Corrosion Resistance: It can resist corrosion for a long time in soil and water with different pH values.
- 💧 Good Water Permeability: There are gaps between the fibers, so it has excellent water seepage performance.
- 🦠 Good Anti-Microbial Performance: It is not damaged by microorganisms and moth-eating.
- 🏗️ Convenient Construction: Due to its light and soft material, it is convenient for transportation, laying and construction.
- 📦 Complete Specifications: The maximum width can reach 9 meters, which is the widest product in China; Unit area weight: 100–1000g/m².
- ✅ Comprehensive Performance: Light weight, low cost, corrosion resistance, and excellent performances such as filtration, drainage, isolation and reinforcement.
Widely used in geotechnical projects including water conservancy, electric power, mines, highways and railways.
Factory direct sales with stable quality and competitive price
Complete specifications and sufficient stock for fast delivery
Strict quality inspection to ensure compliance with standards
Customizable weight, width and packaging
Professional technical support and after-sales service
It is laid manually by rolling, ensuring the cloth surface is flat with an appropriate deformation allowance. Basic requirements for geotextile laying: The seams must intersect with the slope line; at places parallel to the slope toe or where stress may exist, the distance between horizontal seams must be greater than 1.5m. On the slope surface, anchor one end of the geotextile, then lower the roll along the slope to keep the geotextile in a tight state. All geotextiles must be pressed with sandbags, which will be used during laying and retained until the upper layer of material is laid.
